-
Dienstag, 25. Juni 2019
-
Kangertech GEM Pod Kit VS Smoant Pasito Pod Kit
Dienstag, 25. Juni 2019
Kangertech GEM Pod系统Vape套件
Kangertech GEM Pod Kit by KangerTech is definitely a flavor-oriented pod system with an exquisite design. The 2mL refillable pod adopts the advanced ceramic heating element to retain the original flavor. The bottom pull-to-open system eases juice filling. The built-in 500 mAh battery can easily fulfill your daily use and be fully charged within an hour. The battery status can be simply told from the three LED indicator lights. Activated by inhaling, GEM is designed without any button, which just makes it very easy to use. Enjoy the sparkle of vaping life brought by GEM!
Parameters of Kangertech GEM Pod System Vape Kit
Dimension 32x 14x 80mm
Battery 500mAh internal battery
E-juice Capacity 2ml
Refill Bottom filling
Coil Ceramic Coil
Resistance 1.2ohm
Voltage 3.7V
Wattage 11.5W
Charging USB Port
Connection Magnetic Connection
Smoant Pasito Pod System Vape Kit
Smoant Pasito pod Kit has a 1,110mAh built-in battery and can be charged via USB Type C. This not only allows for faster charging times but is safer as well. Not to mention, it is constructed of Space Aluminum and Food Grade PCTG, ensuring excellent durability, while keeping it lightweight. In addition, its overall shape is similar to that of some of the best pod vapes on the market today. This ergonomic shape and size just simply
works well as it is pocket-friendly and comfortable to useParameters of Smoant Pasito Pod System Vape Kit
Size: 102x38x18mm
Material: Space Aluminum
Battery Capacity: 1100mAh Built-in Battery
Wattage Range: 10-25W
Pod Capacity: 3ml
Resistance Range: 0.3-3ohm
Voltage Range: 3.2-4.2V
Charge: 5V/1A
Conversion Rate: 95%
Cartridge Size: 45x36x18mm
Cartridge Material: Food grade PCTGCheck more pod vape kit on Vaporl.
-
Ultra-Portable Kit: SMOK MICO & Trinity Alpha
Donnerstag, 4. April 2019 - in Vape Review
Here are the latest vape pod system kits from SMOK.
SMOK MICO Kit
SMOK newly launched MICO Kit. SMOK Mico Kit is powered by a built-in 700mAh lithium battery with 26W max output. There are two pods included, one pod with 0.8Ω mesh coil and one pod with 1.0Ω regular coil which can offer superb MTL vaping experience; both of them have 1.7ml capacity, and you can drip your favorite e-liquid into them. SMOK MICO vape kits are designed with classic resin patterns on the device, which are a feast to your eyes. It comes with compact design and pocket size, which is very easy for carrying everywhere. The ergonomically designed mouthpiece fits for your mouth well for comfortable vaping experience. In addition, it is also equipped with a lanyard for practical use. And there is an intelligent LED indicator, which displays the battery status clearly. Multiple protections are also applied to guarantee safe and stable vaping. 7 colors are available.
Specs & Features:
- Size: 56.3*46.5*14.8mm
- Resistance Range: 0.6Ω-2.0Ω
- E-liquid Capacity: 1.7ml
- Battery Capacity: 700mAh
- Output Power: 10-26W
- Input Voltage: 3.3V-4.2V
- Output Voltage: 3.0V-4.0V
- Material: Zinc alloy
- Palm Size with Delicate Texture and Soft Touch
- Transparent E-liquid Window
- Ergonomic Design Mouthpiece
- Decorative Lanyard for Practical Use
SMOK Trinity Alpha Kit
SMOK Trinity Alpha Pod System Kit has special square box shaped that is different from other pod system kit. The colorful resin panel makes it looks mistery and unique. SMOK Trinity Alpha vape pods kit features a large 1000mAh internal battery capacity provide you long time vaping. Moreover, it adopts an ingenious push-up-type design on its filling cap to ensure everyday long-lasting vaping with a maximum e-liquid capacity of 2.8ml. The Trinity Alpha kit comes with a big fire button in the side of mod which is easy to find and press. There are three modes for satisfying differnet vaping demands- Soft/Norm/Hard. You can switch to choose your desired mode by pressing the mode button. Moreover, corresponding LED light will be on. The pod cartridge is locked by a lock button, you can easily achieve the pod attachment and detachment by pushing this lock button. It is compatible with Nord mesh coils, bring intense flavor.
Specs & Features:
- Size: 91mm * 38mm * 16mm
- Material: Zinc alloy
- Battery: Built-in 1000mAh Battery
- Output Power: 10-25W(soft/norm/hard)
- E-juice capacity: 2.8mL
- Resistance: 0.4ohm-1.4ohm
- Output Voltage: 2.4 - 6.0V
- Input Voltage: 3.3 - 4.2V
- Charging Voltage: 5V
- Charging Current: 0.7A(max)
- Standby Current:<200uA(NO Load)/<250uA(Load)
- Refill: Threaded Cap Top-Fill
- Protections: Short-Circuit/ Weak Battery/ Temperature /Low/High Resistance Protections
- Charging: Micro USB Port
-
Usonicig Zip Kit VS SMOK MICO Kit
Mittwoch, 20. Februar 2019 - in Vape Review
Usonicig Zip Kit
With a higher vibration frequency and new liquid supply system, Usonicig Zip produces smaller aerosol particles, leads you to a pure flovourful journey, exceeding your expectations on nic-salts enjoyment. No coil, never burnt, just simply assure you an intense and original taste from liquids, allowing you a no-mess relaxing vape time. The most important is that ZIP vape kits have good reputation for its best flavour with nicotine salts and higher CBD bioavailability. Morever, the pioneering TRF design, let you say goodbye mess filling forever,and the long-lasting Ultrasonic chip can last more than 5000 puffs.
Specs & Features:
- Size: 94 x 34 x 20mm
- Capacity: 2ml
- Battery: 1200mAh
- Charging Time: <1.5h
- Ultrasonic Frequency: 3MHz
- Life span: More than 5000 puffs
- Higher vibration frequency and new liquid supply system, smaller aerosol particles
- No Coil, No Mess, Never Burnt, Just Clean Taste
- The one and only top-rotate filling design, Childproof Design
- Good reputation for best flavor with Nicotine salt and CBD oil
- Long-lasting Ultrasonic chip, more than 5000 puffs
SMOK MICO Kit
SMOK MICO Kit adopts a classic resin design on the device where the unique multicolored fluid lines look like abstract oil painting, possessing a stylish and elegant high-gloss finish. Powered by a build-in 700mAh lithium battery, MICO cheap vape starter kit is sufficient for you to enjoy vaping all day along. There are two pods included in this kit, one pod with 0.8ohm mesh coil and one pod with 1ohm regular which can offer superb MTL vaping experience; both of them have 1.7ml capacity, and you can drip your favorite juice into them. Innovation keeps changing the vaping experience!
Specs & Features:
- Material: Zinc alloy
- Size: 56.3*46.5*14.8mm
- Weight: 65g
- Battery Capacity: 700mAh
- Output Power: 10-26W
- Input Voltage: 3.3V-4.2V
- Output Voltage: 3.0V-4.0V
- Standby Current: <20uA (No load)/<100uA (Load)
- Charger Output: DC 5V 0.5A
- Charging Voltage: 5V
- Charging Current: 0.37A (MAX)
- Resistance Range: 0.6Ω-2.0Ω
- E-liquid Capacity: 1.7ml
-
UWELL Crown 4 Tank with VOOPOO Drag 2 Mod
Freitag, 15. Februar 2019 - in Vape Review
There is a vape combo for mesh coil tank and insta-fire vaping mods.
UWELL Crown 4 Tank
The Uwell Crown 4 Tank is the latest generation sub-ohm tank by Uwell. The 25.7mm wide base and 28mm bubble tank combine for e-liquid capacity of 6mL, and the slim tank option included offers an e-juice capacity of 5mL. The triple bottom airflow channels allow you to customize the draw.
The Crown 4 vape atomizers so use a new series of press fit coils based on the popular Crown 3 series, with a patented self cleaning base did re-Absorbs e-liquid caught in the base of the chassis, Preventing leaks and reducing waste. A 0.4Ω dual SS904L coil rated for 60-70W is pre-installed, and a 0.2Ω dual SS904L coil rated for 70-80W is included.
Specs & Features:
- 25.7mm diameter base
- 28mm diameter
- 6mL maximum capacity
- Stainless steel construction
- Bubble glass
- Triple Airflow slots
- Adjustable Airflow
- Top fill design
- Plug and pull coil
VOOPOO Drag 2 Mod
The VOOPOO DRAG 2 is powered by dual 18650 batteries; Drag 2 vape mods can fire up to a powerful output of 177W. As a new generation of drag, the Drag 2 is moch lighter and functional. The Drag 2 MOD adopts GENE.FIT chip, which is secured by a V0 class fireproofing bridge to block dust, liquid or burnout. FIT is a mode that can protect its most of its FIT 1/2/3 intelligent matches.
Specs & Features:
- Size: 62 * 51 * 26.5mm
- Material: Stainless Steel + Resin
- Power Range: 5-177W
- Battery: 2 * 18650 Batteries (Not Included)
- Working Voltage: 6.4-8.5V
- Working Current: 1-40A
- Output Voltage Range: 0-7.5V
- Resistance Range: 0.05-3.0 (VW); 0.05-1.5 (TC)
- Thread: 510
- Specular finishing + multiple resin plates, with high performance
- Innovative GENE.FIT chip
- DRAG 2 employs new designs to fit your hands
- Slimmer and 1/4 lighter than its predecessor